m12 washer（M12 Washer Specs）

Today, the editor will share with you knowledge about m12 washer and m12 washer（M12 Washer Specs）. This article provides a comprehensive and detailed analysis and explanation of this knowledge, hoping to be helpful to you!

List of contents of this article

• m12 washer
• m12 washer dimensions
• m12 washer size
• m12 washer thickness
• m12 washer weight

m12 washer

The M12 washer is a type of flat washer with a hole diameter of 12 millimeters. It is commonly used in various industries and applications where a secure fastening is required. The washer is typically placed between the nut and the surface being fastened to distribute the load and prevent damage to the surface.

One of the primary purposes of using an M12 washer is to provide a larger bearing surface area. By increasing the surface area, the washer helps to distribute the load more evenly, reducing the pressure on the fastened components. This is particularly important when dealing with softer materials or when tightening a fastener with high torque.

Another advantage of using an M12 washer is that it helps to prevent loosening of the fastener over time. The washer acts as a locking device, providing resistance against vibration and movement. This is especially crucial in applications where the fastened components are exposed to constant vibrations or dynamic loads.

M12 washers are available in various materials, including stainless steel, carbon steel, and nylon. The choice of material depends on the specific requirements of the application. Stainless steel washers are resistant to corrosion and are often used in outdoor or corrosive environments. Carbon steel washers are strong and durable, making them suitable for heavy-duty applications. Nylon washers, on the other hand, are lightweight and offer excellent insulation properties, making them ideal for electrical applications.

When selecting an M12 washer, it is essential to consider the thickness and outer diameter as well. The thickness of the washer should be compatible with the fastener being used to ensure a proper fit. The outer diameter should be large enough to cover the entire surface area of the fastened components.

In conclusion, the M12 washer is a versatile component used in a wide range of industries and applications. Its primary functions include providing a larger bearing surface area, distributing the load evenly, preventing loosening of fasteners, and acting as a locking device. The choice of material and dimensions depend on the specific requirements of the application.

m12 washer dimensions

M12 washers are commonly used in various applications to distribute the load of a threaded fastener, such as a bolt or a screw. These washers are designed to fit with M12 bolts, which have a diameter of 12 millimeters. The dimensions of an M12 washer can vary slightly depending on the specific standards followed by the manufacturer, but there are some general guidelines to consider.

The outer diameter (OD) of an M12 washer is typically around 24 millimeters. This means that the washer extends 6 millimeters beyond the edge of the bolt when placed around it. The inner diameter (ID) of the washer, on the other hand, is typically around 12.5 millimeters. This allows the washer to fit snugly around an M12 bolt without interfering with its threads.

The thickness of an M12 washer can vary, but it is usually around 2 to 3 millimeters. This thickness provides the necessary support and load distribution when the washer is tightened against a surface. It is important to choose a washer with an appropriate thickness based on the specific application and the material being fastened.

M12 washers are available in different materials, such as steel, stainless steel, and nylon. The choice of material depends on factors like the desired strength, corrosion resistance, and cost. Steel washers are commonly used for general applications, while stainless steel washers are preferred in environments where corrosion is a concern. Nylon washers, on the other hand, are often used when electrical insulation or vibration resistance is required.

In summary, M12 washers have an outer diameter of around 24 millimeters, an inner diameter of around 12.5 millimeters, and a thickness of 2 to 3 millimeters. These dimensions may vary slightly depending on the manufacturer and the specific standards followed. It is important to choose the appropriate washer material and thickness based on the application requirements.

m12 washer size

The M12 washer is a commonly used washer size in various industries. It has specific dimensions and functions that make it suitable for specific applications. The “M” in M12 stands for metric, indicating that it follows the metric system of measurement. The number “12” refers to the inner diameter of the washer, which is 12 millimeters.

The M12 washer is typically used in conjunction with a bolt or a screw to provide stability and distribute the load over a larger surface area. It acts as a spacer and prevents the fastener from digging into the material being fastened. The outer diameter of the washer is larger than the diameter of the bolt or screw, allowing it to cover a larger area and provide better support.

The thickness of the M12 washer can vary depending on the specific application and requirements. However, it is generally around 2-3 millimeters. This thickness ensures that the washer is sturdy enough to withstand the pressure and load placed on it.

M12 washers are available in different materials, including stainless steel, carbon steel, and nylon. The choice of material depends on the specific application and the environment in which the washer will be used. Stainless steel washers are corrosion-resistant and suitable for outdoor or high-moisture environments. Carbon steel washers are strong and durable, making them suitable for heavy-duty applications. Nylon washers are lightweight and non-conductive, making them ideal for electrical applications.

In summary, the M12 washer is a metric washer with an inner diameter of 12 millimeters. It is used in various industries to provide stability, distribute load, and prevent fasteners from damaging the material being fastened. The thickness and material of the washer can vary depending on the application requirements. Choosing the right washer size and material is essential for ensuring the effectiveness and durability of the fastening system.

m12 washer thickness

The thickness of an M12 washer refers to the measurement of the washer’s height or thickness. M12 refers to the size of the bolt or screw that the washer is designed to be used with.

In the metric system, the size of a washer is denoted by the inner diameter (ID) and the outer diameter (OD). For an M12 washer, the inner diameter would be 12mm, while the outer diameter can vary depending on the specific type of washer.

The thickness of an M12 washer can also vary, depending on the application and the specific requirements of the bolted joint. Generally, the thickness of a washer is chosen to provide proper load distribution and to prevent the bolt head or nut from sinking into the material being fastened.

Standard thicknesses for M12 washers can range from 1.6mm to 3mm or more. Thinner washers are often used in applications where space is limited or where a lower profile is desired. Thicker washers, on the other hand, are used to provide additional support and to compensate for any irregularities in the mating surfaces.

It is important to note that the thickness of the washer should be compatible with the size of the bolt or screw being used. Using a washer that is too thick or too thin can affect the overall performance and integrity of the bolted joint.

In conclusion, the thickness of an M12 washer can vary depending on the specific application and requirements. It is important to choose the appropriate thickness to ensure proper load distribution and to maintain the integrity of the bolted joint.

m12 washer weight

The weight of an M12 washer can vary depending on the material it is made of. M12 refers to the size of the washer, specifically the inner diameter, which is 12 millimeters. The weight of the washer is determined by its dimensions and the density of the material.

Typically, M12 washers are made from various materials such as steel, stainless steel, brass, or nylon. Each material has a different density, resulting in different weights for the same size washer. Steel washers are commonly used and have a density of around 7.85 grams per cubic centimeter (g/cm3). Stainless steel washers have a similar density, while brass washers have a density of approximately 8.4 g/cm3. Nylon washers are much lighter, with a density of around 1.15 g/cm3.

To calculate the weight of an M12 washer, you need to know its volume, which can be calculated using the formula for the volume of a cylinder (V = πr2h). The radius (r) of an M12 washer is 6 millimeters (half of the inner diameter), and the height (h) is typically around 1.6 millimeters. By plugging these values into the formula, you can find the volume of the washer.

Once you have the volume, you can multiply it by the density of the material to calculate the weight. For example, if you have a steel M12 washer with a volume of 0.301 cubic centimeters (cc), the weight would be approximately 2.36 grams (0.301 cc * 7.85 g/cm3). Similarly, a stainless steel washer of the same size would have a similar weight, while a brass washer would weigh around 2.52 grams (0.301 cc * 8.4 g/cm3). In contrast, a nylon washer would only weigh about 0.34 grams (0.301 cc * 1.15 g/cm3).

It is important to note that these calculations provide approximate weights as they assume perfect geometry and uniform density throughout the washer. Additionally, there may be slight variations in weight due to manufacturing tolerances. Therefore, it is always recommended to refer to the specifications provided by the manufacturer for accurate weight information.