2017 dodge journey key fob battery（2017 Dodge Fob Battery Size）

Today I will share with you the knowledge of 2017 dodge journey key fob battery, which will also explain the 2017 dodge journey key fob battery（2017 Dodge Fob Battery Size）. If you happen to be able to solve the problem you are currently facing, don’t forget to follow this website and start now!

List of contents of this article

• 2017 dodge journey key fob battery
• 2017 dodge journey key fob battery size
• what kind of battery does a 2017 dodge journey key fob take
• how to replace key fob battery 2018 dodge journey
• 2016 dodge journey key fob battery size

2017 dodge journey key fob battery

The 2017 Dodge Journey is a popular mid-size SUV that comes equipped with a key fob for convenient access to the vehicle. Like any electronic device, the key fob requires a battery to function properly. If you find that your key fob is not working as expected, it may be time to replace the battery.

To replace the key fob battery on a 2017 Dodge Journey, follow these simple steps:

1. Purchase the correct battery: The key fob for the 2017 Dodge Journey requires a CR2032 battery. Ensure you have the correct battery before proceeding.

2. Locate the battery compartment: The key fob has a small compartment on the back that houses the battery. Look for a small slot or groove where you can insert a coin or flathead screwdriver to open it.

3. Open the battery compartment: Insert a coin or flathead screwdriver into the slot and gently pry open the battery compartment cover. Be careful not to damage the key fob or the cover.

4. Remove the old battery: Once the cover is open, you will see the old battery. Carefully remove it by sliding it out or using a small tool to pop it out.

5. Insert the new battery: Take the new CR2032 battery and insert it into the battery compartment. Make sure it is properly aligned with the positive (+) and negative (-) markings.

6. Close the battery compartment: Once the new battery is in place, close the battery compartment cover by pressing it firmly until it clicks into place.

7. Test the key fob: Press any button on the key fob to ensure it is working properly. If the buttons respond, the battery replacement was successful.

It is recommended to replace the battery in your key fob every 1-2 years to ensure optimal performance. However, the lifespan of the battery can vary depending on usage.

In conclusion, replacing the key fob battery on a 2017 Dodge Journey is a simple task that can be done in a few minutes. By following the steps outlined above, you can easily replace the battery and restore the functionality of your key fob.

2017 dodge journey key fob battery size

The 2017 Dodge Journey key fob requires a CR2032 battery. This small, coin-shaped battery is commonly used in various electronic devices, including key fobs. The CR2032 battery is a lithium coin cell battery that provides a reliable and long-lasting power source for the key fob.

To replace the battery in the 2017 Dodge Journey key fob, you will need to follow a few simple steps. First, locate the small groove on the side of the key fob. Insert a small flathead screwdriver or a coin into the groove and gently twist to separate the two halves of the key fob.

Once the key fob is open, you will see the battery compartment. Carefully remove the old battery and dispose of it properly. Take note of the battery’s orientation, as you will need to insert the new battery in the same way. Insert the CR2032 battery into the compartment, ensuring that the positive side is facing up.

After replacing the battery, carefully snap the two halves of the key fob back together. Make sure they are securely fastened to avoid any issues with the key fob’s functionality. Once the key fob is reassembled, you can test it by pressing the buttons to lock or unlock your vehicle.

It is always a good idea to keep spare batteries on hand, especially if you frequently use your key fob or if the battery has been in use for a while. Replacing the battery in your 2017 Dodge Journey key fob is a simple and straightforward process that can be done at home with minimal tools.

what kind of battery does a 2017 dodge journey key fob take

The 2017 Dodge Journey key fob uses a CR2032 battery. This type of battery is a 3-volt lithium coin cell battery that is commonly used in various electronic devices, including key fobs for many car models.

To replace the battery in a 2017 Dodge Journey key fob, you will need to follow a few simple steps:

1. First, locate the small slot on the side of the key fob. This slot is used to open the key fob and access the battery compartment.

2. Insert a small flathead screwdriver or a coin into the slot and gently twist it to separate the two halves of the key fob. Be careful not to apply excessive force to avoid damaging the key fob.

3. Once the key fob is open, you will see the battery compartment. Take note of the orientation of the old battery before removing it to ensure proper installation of the new battery.

4. Remove the old battery by carefully prying it out of the compartment using a small tool or your fingers.

5. Take the new CR2032 battery and insert it into the battery compartment, making sure it is properly aligned with the positive (+) and negative (-) markings.

6. Press the two halves of the key fob back together until they snap into place. Ensure that the key fob is securely closed.

7. Test the key fob by pressing the buttons to ensure that the new battery is working correctly.

It is always a good idea to have spare CR2032 batteries on hand, as they are widely available and relatively inexpensive. Keeping a spare battery can save you from being locked out of your vehicle if the key fob battery dies unexpectedly.

Remember to dispose of the old battery properly, as lithium batteries should not be thrown in regular trash. Many electronic stores and recycling centers accept used batteries for proper disposal.

By following these simple steps, you can easily replace the battery in your 2017 Dodge Journey key fob and ensure that it continues to function properly.

how to replace key fob battery 2018 dodge journey

To replace the key fob battery in a 2018 Dodge Journey, follow these simple steps:

1. First, gather the necessary tools and materials. You will need a small flat-head screwdriver and a replacement battery. For the 2018 Dodge Journey key fob, you will typically need a CR2032 battery.

2. Locate the small slot on the side of the key fob. Insert the screwdriver into the slot and gently twist it to pry open the key fob. Be careful not to apply too much pressure to avoid damaging the fob.

3. Once the key fob is open, you will see the battery compartment. Carefully remove the old battery and set it aside.

4. Take the new battery and ensure that the positive (+) side is facing up. Insert the battery into the compartment, making sure it is securely in place.

5. Close the key fob by aligning the two halves and gently pressing them together. You should hear a click when it snaps back into place.

6. Test the key fob to ensure that the battery replacement was successful. Press any button on the fob, and if the vehicle responds accordingly, the replacement was done correctly.

7. If the key fob does not work, double-check the battery’s orientation and make sure it is firmly seated in the compartment. If the issue persists, you may need to consult a professional or contact your local Dodge dealership for further assistance.

Remember, it is always a good idea to keep spare batteries on hand, as key fob batteries can die unexpectedly. Regularly replacing the battery in your 2018 Dodge Journey key fob will ensure that you can continue to use it without any interruption.

2016 dodge journey key fob battery size

The 2016 Dodge Journey key fob requires a CR2032 battery. This small, round, lithium coin cell battery is commonly used in various electronic devices, including key fobs, watches, and calculators. The CR2032 battery is readily available at most electronic stores, hardware stores, and online retailers.

To replace the battery in your 2016 Dodge Journey key fob, follow these simple steps. First, locate the small slot on the side of the key fob. Insert a small flat-head screwdriver or a coin into the slot and gently twist to separate the key fob’s two halves. Be careful not to apply too much force to avoid damaging the key fob.

Once the key fob is open, you will see the CR2032 battery. Carefully remove the old battery and dispose of it properly. Take note of the battery’s positive (+) and negative (-) orientation. Ensure that the new CR2032 battery is inserted correctly, matching the positive and negative symbols on the key fob.

Once the new battery is in place, align the two halves of the key fob and press them together firmly until they snap back into place. Test the functionality of the key fob by pressing the buttons to lock and unlock the vehicle. If the key fob is still unresponsive, double-check the battery orientation and ensure it is securely in place.

It is always a good idea to keep a spare CR2032 battery on hand, as key fob batteries can die unexpectedly. Having a spare battery readily available will ensure that you can quickly replace it and continue using your key fob without any interruption.

In conclusion, the 2016 Dodge Journey key fob uses a CR2032 battery. Replacing the battery is a simple process that can be done at home with a small flat-head screwdriver or a coin. Remember to dispose of the old battery properly and keep a spare battery on hand for convenience.